Hexcel adds U.S. production for HexPly M901 prepreg at Salt Lake City plant

By Public Technologies
  • Hexcel added U.S. manufacturing capability for its HexPly M901 fast-curing prepreg system at its Salt Lake City facility.
  • Move expands domestic supply for a material developed in the U.K. and currently produced in France.
  • M901 targets higher-rate composite production, with cure cycles of 4-5 minutes and Tg performance up to 180°C.
  • System supports autoclave or press curing, hot-in/hot-out processing, compression molding, thick sections, and up to 15 weeks out life.


Disclaimer: This news brief was created by Public Technologies (PUBT) using generative artificial intelligence. While PUBT strives to provide accurate and timely information, this AI-generated content is for informational purposes only and should not be interpreted as financial, investment, or legal advice. Hexcel Corporation published the original content used to generate this news brief on September 22, 2026, and is solely responsible for the information contained therein.

Capital Com is an execution-only service provider. The present material must be regarded as marketing communication and should not be interpreted as investment research or investment advice. Any opinion that may be provided on this page does not constitute a recommendation by Capital Com or its agents. We do not make any representations or warranty on the accuracy or completeness of the information that is provided on this page. If you rely on the information on this page, then you do so entirely at your own risk